Auto Parts 4Pcs Metal Wheel Tire Valve Stem Cap Air Cover Aluminum
Brand new, high quality!
Quantity: One Set consists of 4 Caps
Product name: valve mouth
Color: black, red, blue, silver, purple, gold
Material: aluminum alloy
A pack of four
The auction item is 100% brand new .
Made by high quality light weight chrome plated aluminum.
Comes with 4 pieces of wheel valve caps.
Adds the finishing touch and decorates your wheels.
Corrosion and water resistant.
Easy to install. Direct screw-on without any modification
4pcs/lot car tire wheel valce caps
The valve of the tire valve is used as an inflatable port and valve
for air discharge, and the air is not leaking.It is also a device
for checking the tyre pressure.Valve mouth can be divided into two
types: one is metal, the main body is brass;A rubber mat for the
main body of rubber.The main body of the valve is equipped with a
valve that works like a one-way valve, and the compressed air can
be used to fill the inner tube without air leakage.The valve cap
can also be used as a wrench to wring in and out of the valve
core.The metal valve has a bridge pad and compression nut on the
mouth to improve the bond with the inner tube.The shape of valve
mouth is curved and straight pipe, and the valve nozzle is only
used on flat rim.When the rear wheel is a double tire, the tube
valve can be used to inflate the tire.
|Name:Tire Valve||Metarial:Aluminum Alloy|
|Color: Black, Red, Blue, Silver, Purple, Gold||Place of Origin:China|
|Brand:JR||Term of Trade:E X W(Guangzhou)|
1. Remove the valve core and air.
2. Separate the air port of the tire and remove it from the wheel.
Remove the valve nozzle.
4. Clean the hole in the steel and remove dirt and dirt.
5. Install the new valve nozzle inside the wheel steel.
6. Properly install the tire and inflate it to the fixed pressure.
Put on a new valve cap.
About the Valve:
In everyday use, as the owner's no doubt we will pay special
attention to slow leak phenomenon caused by valve seal is lax, if
turned a deaf ear to valve slow leak phenomenon, not only can
increase the wear of the tire and vehicle fuel consumption, even
lead to the happening of the flat tire.From this point of view, the
daily periodic inspection of the valve mouth should not be ignored.
The simplest and most practical way to check air tightness is by
watering the valve to see if it is produced.If a turtle is found in
the valve body of the rubber valve, it should be replaced in
time.The metal valve mouth is in the air leak, "the barb" the sound
will be obvious, the car owner can also judge the valve to leak
gas.Since the tire pressure of the tire will fluctuate with the
change of temperature, we suggest that the tire pressure should be
tested every month, and we can also check the valve of the valve at
the same time.In addition to regular check, in daily use, but also
pay attention to whether or not the valve cap is missing, careful
shoulder may scratch on valve, also notice when change tire
technician will tire wall marked yellow aim point location and the
valve, in order to make tires tend to be more balanced overall
quality.(the yellow mark represents the lightest point of the
Our valve of choose and buy, in addition to consider the material
problem, also note that the dimensions of the valve, the quality of
the valve core and valve cap contain sealing strip, at the same
time we also don't be blinded by the valve of the colour is
gorgeous.When buying the current tire pressure monitor, choose the
built-in tire pressure sensor to avoid the loss of the exposed
Conclusion: complete life if you ignore the existence of the valve
is apparently not so wise, little it's about our car can be normal,
safe on the road, different material of valve mouth also have their
own different characteristics.While we hope that through this
article, can let you have new understanding of valve and more
comprehensive understanding of in-use vehicle life more attention
to the use of valve conditions, to ensure that our own.
1.Positive Feedback is very important to us.if you are satisfied
with our service, please remeber to give a positive feedback.
2.Please contact us before leaving neutral or negative feedback,we
will try our best to solve the problems.
3.If you are not satisfied with our best to solve the
problems,please contanct us before leaving your feedback and we
will resolve the issue immediately.thank you very much.
High quality and Durable